Kyoritsu Malaysia

Menu

+604 397 1388

Dust Collector

CKU-240AT3-HC

Air volume type small dust collector

This is a small airflow type dust collector that is effective in removing floating dust generated by production equipment in clean rooms. It has a compact design and high performance. It is often used in the electronic parts industry and semiconductor post-processing to prevent adhesion of particles to products. This is our standard series of small dust collectors.

24-hour continuous operation possible, compact and high performance

In order to realize our concept of “small size and high performance”, we have newly developed the fan motor at the heart and its control. Compared to other companies’ equivalent products, we have achieved a 50% reduction in volume. We will contribute to the miniaturization of equipment, which has been highly requested in recent years. Of course, both 50Hz / 60Hz can be used with the same performance.

 

 

(1) Primary filter

A filter bag with a 5-layer structure of polypropylene non-woven fabric. By changing the air permeability of each layer, clogging is less likely to occur, and 95% or more can be collected at 45μ or more. Also, due to the 5-layer structure, the overall strength is high and it does not tear easily like a paper carton.

(2) Secondary filter

Polypropylene non-woven fabric is molded into a pleated filter. The outer frame is molded with ABS resin. The collection efficiency is high and 0.3μ can be collected by 99% or more.

(3) Exhaust filter

It uses the same filter as the 2nd order filter and collects particles that were not collected in the 1st and 2nd order. Furthermore, it is installed for the purpose of collecting fine particles generated in the fan motor room. It collects 99% or more of 0.3μ and can be installed in clean class 100,000 to 10,000.

By installing a HEPA filter (collection efficiency 0.3μ, 99.97% or more) on the exhaust side, it becomes possible to support Clean Class 1000.
* Factory inspection If the
model end is V1, the exhaust filter will be a HEPA filter specification.
Even after purchasing the standard specification product, you can easily change to the V1 specification.
* Since the size of the HEPA filter changes, it is necessary to replace the exhaust cover.

 

Remote control

By using a remote cable (sold separately / model: MT-173-8 (3m)), remote control linked with peripheral devices is possible.

  • Driving ON / OFF
  • Ability level (air volume) change

You can now change the ability level by remote control. Since the level is memorized every time the ability level is changed, the previous usage level is always called. In addition, it is possible to output operation signals, filter clogging signals, pressure signals, and abnormal signals.

Ethernet / RS-485

All functions that can be controlled by the AT3 panel can be controlled by a PC by using Ethernet or RS-485 communication.

Easy attachment / detachment flange (standard: φ75) (sold separately)

  • Can be replaced with one touch
  • The suction port size can be changed

The size of the suction port flange can be replaced with a single touch. The suction port flange (sold separately) can now be changed even after purchase.

Changeable size

Φ65: Model FRJ-D-65-35-108 Φ50
: Model FRJ-D-50-35-108 Φ38
: Model FRJ-D-38-35-108

Q: Required air volume (m3 / min)
Vc: Control air speed (m / sec) ・ ・ ・ ・ See the figure below
X: Distance (m) ・・ ・ ・ ・ ・ ・ ・Distance from dust source to suction port
A: Opening surface Area (m2) ・ ・ ・ L × W
Air volume Q = 60 x Vc x (10 x X² + A)

 

 

  • * 1 This is a value measured with A scale (dBA) at any point 1 m away from the main body by connecting a hose to the suction port.
  • * 2 An optional remote cable is required to use the remote control function.
  • * 3 Optional support is available.
  • * 4 Value at the time of inspection shipped from our factory.

The contents are subject to change without notice.

Menu